BETAFPV Canopy for Micro Camera 2022

BETAFPV Canopy for Micro Camera 2022

New canopy for the micro camera is coming with new features. The injection molding technique brings durability and flexibility to the canopy, which is a great choice for micro cameras with 20° or 30° lens. Besides, the hollow-out design not only reduces the influence of heat on electronic parts but also is available to be armed with decorative parts we prepared. Recommend using it with BETAFPV Meteor Series.

5,78 €
Impuestos incluidos
  • Blanco
  • Negro
  • Naranja
  • Azul
  • Rosa
  • Azul cielo
 Reserva
 

Compra seguro. Usamos Paypal y otras plataformas de pago seguras.

 

Envío rápido. 24/48 horas España. 3-7 días internacional.

 

Política de devoluciones. Lea nuestros términos y condiciones.

Calcular Coste de Envío

Descripción

Bullet Point

  • Adopt with injection molding technique, this canopy is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
  • Unique design with three decorative parts like a knight, the drone flies in the air like a scientific spaceship cruising, making it very cool and special. Also, the decorative parts are detachable for better heat dissipation.
  • Come with three types of camera mount for 20°/30° lens camera. It is suitable for C02 FPV camera.
  • Lightweight and six colors for options (White/Black/Blue/Pink/Green/Orange). Using it with Meteor Series colorful frame will be more attractive. Recommend frames for Meteor65/Meteor65 Pro/Meteor75/Meteor85/Beta65S.

Specification

Elaborate Your Drones

Different colors on your drone fully show uniqueness compared with the single color one. Three decorative parts upgrade a drone to look like a cool and special knight. Three types of camera mounts in the package are prepared for 20°/30° lens cameras like C02. Besides, it is a good idea to mount canopy on various color frames, increasingly individualizing your drones.

Camera Mount & VTX Holder

Two different sizes of camera mount are provided for more cameras. One of the camera mounts is suitable for C02 FPV Camera (20°). The rest of the camera mounts are a little bigger and can be used for other brands' cameras. Besides, the VTX holder support 14*18mm video transmitter like M03 25-350mW 5.8G VTX.

Note: The camera mount is not suitable for every camera. Please refer to the diagram before you install your own FPV camera. We strongly recommend using it with C02.

Package

  • 1 * Micro Canopy 2022 (Black/White/Blue/Orange/Pink/Cyan)
  • 1 * 20° Lens Camera Mount for C02
  • 1 * 20° Lens Camera Mount
  • 1 * 30° Lens Camera Mount
  • 3 * Decorative Parts
  • 4 * M1.4*3 Screws
  • 4 * M1.4*4 Screws