Inicio
Hay 137 productos.
Filtros activos
- Categorías: Radio
Acollador TBS Tango
TBS Lanyard with buckle for quick detach.
Alargador SMA con base magnética (3M)
Cable de extensión con una base SMA magnética para TBS Crossfire o receptores de video analógicos.
Antena de repuesto XM+/R-XSR
Antena de repuesto XM+/R-XSR
Antena de repuesto XM+/R-XSR 95mm 1.13mm
Antena de repuesto XM+/R-XSR.
Antena receptora de repuesto 2.4G 150mm 1.5Dbi IPEX
Antena receptora de repuesto 2.4G 150mm 1.5Dbi IPEX
BETAFPV Dipole T Antenna
The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status.
BETAFPV ELRS 2.4G Lite Receiver
BETAFPV Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ELRS 2.4G V1.2 Micro Receiver
BETAFPV Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ELRS Lite RX/2.4GHz Flat antenna
BETAFPV ELRS Micro TX Module 2.4G 1W
BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ELRS Nano Receiver
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ELRS Nano TX Module
BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ExpressLRS Recovery Dongle
ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS Nano Receiver, ELRS Micro Receiver, and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flash firmware by UART.
BETAFPV LiteRadio 2 SE Radio Transmitter Main Board
This is the main board of the LiteRadio 2 SE radio transmitter. It is compatible with the remote controller case of all LiteRadio 2 and LiteRadio 2 SE. For the owner of this radio transmitter, geting this main board is the most budget way to try the most popular ExpressLRS 2.4G radio link protocol.
BETAFPV LiteRadio 2 SE Radio Transmitter V2
El transmisor de radio LiteRadio 2 SE es la versión mejorada basada en LiteRadio 2 y viene con grandes mejoras. Admite Frsky / Futaba / Bayang, los pilotos pueden cambiar fácilmente el modo Futaba, Frsky D8, Frsky FCC D16 y Frsky LBT D16 a través del transmisor de radio. Viene con una potencia de transmisión de 100 mW, LiteRadio 2 SE ofrece un rango operativo más amplio.