Inicio
Hay 343 productos.
Filtros activos
Matek UBEC Duo, 4A/5-12V
TBS Diamond Antena
Una antena ligeramente direccional para la mejor penetración de la señal. Diseñada ultra durable usando lecciones aprendidas de TBS Triumph, y diseñado por IBCrazy!
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Matek ELRS 2.4G True Diversity RX
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
TBS Tracer Nano TX
In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for days.
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
ImmersionRC TrampHV
EL transmisor de vídeo de 5.8GHz más avanzado. Solo 4 gramos, y de dimensiones reducidads de 31 x 20mm, el TrampHV también es el vtx más pequeño que se puede alimentar directamente a la LiPo.
Soporta la configuración "touch-free", para cambiar rapidamente de canal o potencia sin que se caliente el vtx. (accesorio aparte)
Matek Power Module 12S
ImmersionRC Tramp Nano (International Version)
El Tramp HV original se lanzó en 2016 y superó los límites de lo que era posible con un transmisor analógico FPV de 5.8GHz.
El Tramp Nano es el primo más pequeño, más adecuado para los modelos ligeros de hoy.
Control a través de la telemetría Betaflight (modo Tramp), botón o varita Touch'n’Race.
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
HQProp Ethix P3B Peanut Butter & Jelly Prop - Poly Carbonate
Straight from the metal man himself, Mr. Steele, comes the Ethix P3 Peanut Butter & Jelly propeller. They come in yellow and burgundy themed colors and a low profile hub.
ImmersionRC RapidFIRE módulo receptor para gafas FatShark
El mejor de los receptores de 5.8 GHz para gafas FatShark.
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).