Inicio
Hay 340 productos.
Filtros activos
HQProp Gorro
Gorro para volar mejor en los fríos inviernos.
Matek UBEC Duo, 4A/5-12V
HQProp gorra
Gorra de HQProp.
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Gorro Black Sheep (Negro)
Gorro de TBS para mantener tu cabeza caliente durante las excursiones con viento.
Matek ELRS 2.4G True Diversity RX
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
Caddx Cap (Black)
Gorra con el logo de la marca CaddxFPV. En color negro
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
Gemfan Monkey Hat
Gemfan Monkey Hat
ImmersionRC TrampHV
EL transmisor de vídeo de 5.8GHz más avanzado. Solo 4 gramos, y de dimensiones reducidads de 31 x 20mm, el TrampHV también es el vtx más pequeño que se puede alimentar directamente a la LiPo.
Soporta la configuración "touch-free", para cambiar rapidamente de canal o potencia sin que se caliente el vtx. (accesorio aparte)
Matek Power Module 12S
Acollador TBS Tango
TBS Lanyard with buckle for quick detach.
ImmersionRC Tramp Nano (International Version)
El Tramp HV original se lanzó en 2016 y superó los límites de lo que era posible con un transmisor analógico FPV de 5.8GHz.
El Tramp Nano es el primo más pequeño, más adecuado para los modelos ligeros de hoy.
Control a través de la telemetría Betaflight (modo Tramp), botón o varita Touch'n’Race.
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g