Inicio
Hay 257 productos.
Filtros activos
Matek UBEC Duo, 4A/5-12V
Soportes GoPro
Disponemos de piezas TPU para GoPro adaptadas a diferentes frames (Nazgul5, TBS Source One V3...) Si necesitas un soporte para algo más específico no dudes en contactarnos. Para concretar el modelo de la pieza que necesitas, escríbelo en el mensaje del pedido.
TBS Diamond Antena
Una antena ligeramente direccional para la mejor penetración de la señal. Diseñada ultra durable usando lecciones aprendidas de TBS Triumph, y diseñado por IBCrazy!
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Protectores de motor
Disponemos de piezas TPU adaptadas a diferentes frames (Nazgul5, TBS Source One V3...) Si necesitas una pieza para algo más específico no dudes en contactarnos. Para concretar el modelo de la pieza que necesitas, escríbelo en el mensaje del pedido.
TBS 5G8 LHCP Patch - SMA/RP-SMA connector
Fabricada por Team BlackSheep. La ganancia de 5dbi proporciona suficiente ancho de banda para montar cómodamente esta antena de parche directamente al receptor en las gafas.
Matek ELRS 2.4G True Diversity RX
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
TBS Tracer Nano TX
In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for days.
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
FuriousFPV Stubby Air SMA 5.8GHz Antenna (2pcs) - RHCP
¡La nueva FuriousFPV Stubby Air es súper pequeña y súper efectiva! Es la más pequeña que puede conseguir, una antena que se enrosca al extremo de su pigtail SMA.
Matek Power Module 12S
Furious FPV - Poker Chip Antenna RHCP
La antena más nueva para tu receptor de vídeo. Máxima calidad y prestaciones de FuriousFPV.
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
HQProp Ethix P3B Peanut Butter & Jelly Prop - Poly Carbonate
Straight from the metal man himself, Mr. Steele, comes the Ethix P3 Peanut Butter & Jelly propeller. They come in yellow and burgundy themed colors and a low profile hub.
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).