Inicio

Filtros activos

  • Categorías: Back In Stock
  • Categorías: FPV
  • Categorías: Impresión 3D
  • Categorías: Ofertas
20,62 €
En stock

RGB LED Status

[Rainbow fade effect], Starting Up

[Green heartbeat], Web update mode enabled

[Slow blink 500ms on/off ], Waiting for connection from transmitter

[Red flashing 100ms on/off], Radio chip not detected

[Orange Double blink then pause], Binding mode enabled

[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration

[Solid single color Connected to a transmitter], color indicates packet rate

49,52 €
61,90 € -20%
En stock

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for days.

24,79 €
Fuera de stock

EL transmisor de vídeo de 5.8GHz más avanzado. Solo 4 gramos, y de dimensiones reducidads de 31 x 20mm, el TrampHV también es el vtx más pequeño que se puede alimentar directamente a la LiPo. 

Soporta la configuración "touch-free", para cambiar rapidamente de canal o potencia sin que se caliente el vtx. (accesorio aparte)

24,79 €
Fuera de stock

El Tramp HV original se lanzó en 2016 y superó los límites de lo que era posible con un transmisor analógico FPV de 5.8GHz.

El Tramp Nano es el primo más pequeño, más adecuado para los modelos ligeros de hoy.

Control a través de la telemetría Betaflight (modo Tramp), botón o varita Touch'n’Race.

49,55 €
En stock

PM20S-2 is made with 100V DC components.

Support 9V to 85V DC operating Input voltage with 85V TVS protection

2x independent Step-Down Voltage Regulators

Regulator 1 ,  5.3V / 6.1V / 8.1V output options.  supports typical continuous output current of up to 15A, Peak current of up to 22A.

Regulator 2 ,  5.3V / 8.1V / 12.2V output options.  supports typical continuous output current of up to 15A, Peak current of up to 22A.

1K:25K voltage divider built-in for 3.3V based voltage ADC

Size & Weight: 61x40x15mm, 63g