Inicio
Hay 108 productos.
Filtros activos
- Categorías: Ferretería
FRSky MC12P-R Gimbal
FrSky MC12P-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Horus X10 or X10S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.
ToolkitRC M7 multifunctional charger
ToolkitRC ADP 180 AC to DC adapter
ToolkitRC M9 1~8S 20A 600W DC multifunctional charger
ToolkitRC M8S 1~8S 400W 18A DC multifunctional charger
ToolkitRC MC8 multifunctional checker
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek Hall effect-Current sensor
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
ToolkitRC ADP 200 AC to DC Adapter
Input voltage:AC 100-240V 50/60Hz
Input current:MAX 2.5A
Output voltage:MAX 19.5V
Output current:MAX 10.3A
Connector:XT60
Size:165mm * 77mm * 32mm
Wight:518g
Work temp:-10 - 40'C
Servicio de Impermeabilización de tu Dron
Te impermeabilizamos tu dron, y lo testeamos en un entorno seguro. Si eliges este servicio no te preocupas de nada, nos encargamos de organizar la recogida del dron en tu casa, y te lo mandamos una vez este impermeabilizado ¡Sin gasto extra para ti!
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).