iFlight Nazgul5 Analog V3 6S FPV Drone

iFlight Nazgul5 Analog V3 6S FPV Drone

247,11 €
Impuestos incluidos
  • 6S
 Fuera de stock
 

Compra seguro. Usamos plataformas de pago seguras. Para garantías o reembolsos contáctanos.

 

Envío rápido. 24/48 horas España. 3-7 días internacional.

 

Política de devoluciones. Lea nuestros términos y condiciones.

Calcular Coste de Envío

Descripción

Necesita receptor, no esta incluido.

GoPro mount vendido por separado.

PRODUCT DESCRIPTION

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

 

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

 

HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks

 

XL5 V5 frame specs:

 

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

 

Nazgul5 V2 Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Nazgul5(XL5 V5) Frame
  • 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

 

Changelog:

May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.

June 2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.

February 2022: Before SucceX-E F7 flight controller changed to BLITZ F7 flight controller.

April 2022:  Before SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC changed to BLITZ E45S 4-in1 ESC  (6S Version)

FC // BLITZ F7 Flight Controller V1.1

  • MCU: STM32 F722
  • Gyro: BMI270
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • Flash: 32MB (Blackbox flash)
  • UARTS: 6
  • Motor outputs: 4x (SH1.0 connector)
  • I2C serial: SDA / SLA pads
  • Smartaudio / IRC Tramp VTX protocol supported
  • LED controller: Yes
  • Beeper pad: Yes
  • Firmware target: IFRC-IFLIGHT_BLITZ_F722
  • Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
  • Dimensions: 36.5*35 mm
  • Weight: 7.8g

ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC

- Supports: DShot150/300/600/MultiShot/ OneShot etc.

- Mounting Holes: 30.5*30.5mm/Φ4mm

- Supports 2-6S lipo input

- Telemetry Output: NO

- Target: QH-40 16.7

- Current sensor: Yes

- Constant: 45 Amps 

- Current rate: 200

- Burst: 55 Amps

- Weight: 14.7g

- MCU: BB21

- BEC: NO

VTX// SucceX Force 5.8g 800mW VTX Adjustable

- The output power is stable;

- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

Output 48 frequency points, 

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V~36V,+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)

Specs:

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW

- Output 48 frequency points, 

size:36*36*3mm

- PIT/25mW/200mW/400mW/800mW

 

Additional Suggested Parts

También podría interesarle