Hardware

Wide 9V to 55V Operating Input Range with TVS protection

3x independent Step-Down Voltage Regulators

BEC Vx,  5.2V / 6V / 8V output options.  supports typical continuous output current of up to 15A, Peak current of up to 25A.

BEC 5V (Fixed), 4A continuous

BEC 12V (Fixed), 4A continuous

1K:20K voltage divider built-in (Volt = 1/21 Input voltage)

Current sensor signal passthrough pad

Size & Weight: 61x40x15mm, 53g

Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.

There is no detailed datasheet of MSP V2 protocol.

Funda termoretráctil de 1,6 mm de grosor, se retrae un 50% cuando es calentada.

1,2 Diameter Heat shrink tube, it shrinks a 50% when heated.

2.4 Diameter Heat shrink tube, it shrinks a 50% when heated.

3.2 Diameter Heat shrink tube, it shrinks a 50% when heated.

6.4 Diameter Heat shrink tube, it shrinks a 50% when heated.

9.5 Diameter Heat shrink tube, it shrinks a 50% when heated.

10.2 Diameter Heat shrink tube, it shrinks a 50% when heated.

The O3 Air Unit ND filter, ingenuity designed by GEPRC team, has two mounting methods to solve filter mounting problems. Also adapted to DJI AVATA, a variety of filter effects, suitable for a variety of daylight effects to improve image quality.

Note: If you’re building a naked GP camera yourself, please flash the 1.16 Labs Firmware to prevent abnormal voltage display.

GEPRC team specially designed new ND8/ND16/ND32 filter for naked camera GP8, which can reduce the light input of camera sensor without changing the image color.

This is the official RadioMaster gimbal LED mod set. No soldering required easy plug-and-play install that will not void your warranty.