Flight controllers

Features an F7 processor, onboard spaces for both VTX and RX, Pit-mode built-in for Unify Nano, and solder-free connection to FETtec 4-in-1 ESC.

Diatone's Mamba series gives racers an edge in competition. The latest F7 processing technology means you can focus on flying, not on the limits of your equipment.

The Mamba F722 Mini MK2 is one of the most feature packed 20x20mm flight controller. It includes everything you would expect from a modern F7 flight controller including OSD, ESC Telemetry, Dshot1200.

Capable of running 2-6S input voltage, 6 Uarts, and a built-in inverter for S.BUS and S.PORT means you'll be able to adapt the RacePIT FC to almost any build.

A new generation AIO Flight control for FPV, based on F405 MCU, using F4 MCU controls OSD over SPI bus in DMA mode,  Supports 6x UART

OMNIBUS F4's upgrade version, using F405 and new target, with 5x UARTs now.

classic OMNIBUS design, using F4 MCU controls OSD over SPI bus, compare the first version, we added BMP280 as barometer and SD Card supports.

OSD Configuration has been incl. in Betaflight GUI.

Mini Stack, with F7 controller and ESC F35A. Special connector for digital DJI module.

The New Mamba F722APP F50PRO Stack has every connection you could want, with Bluetooth on top of that. Just have a look at the wiring diagram below. It also has pads broken out for 4 RGB LED strips and a dedicated LED controller. This FC has a lot going on, and paired with the new F50PRO 4in1, it makes a killer stack! 

The best coating for the electronics of your drone and make it waterproof. The coating is easy to remove for repairs or component replacement. The product is 15 ml, enough for coating all the electronics of 2-3 drones.

Set of components to mount any type of FC + ESC M2 or M3 stack in the absence of screws of the length you use.

Anti-vibration standoffs M3x6 mm for flight controller. 4 units.

Antivibration dampers for flight controller with M3 holes.