Drone Parts

New Tattu batteries, for drone racing.

¿Too small 5 inch and too large 6 for your drone motors? Here you have, 5.5 inches, in blue color one of the most durables.

These are the latest generation HQProp sporting a 5.1" diameter and a 4.6" pitch. The blade profile is almost as thick as a 5x5x3V1S and should prove to be quite durable. While the scoop isn't as aggressive it appears to be longer and narrower.

HQProp brings its high quality and high performance propellers to the micro class! Each package comes with 4 HQProp propellers, 3 blade style with a 1.5mm center hub and M2 mounting hole pattern.

A very good prop for you 7 inch build. Biblade 4.5 pitch in cool green.

HQProp 6x3x3 V1S durable polycarbonate FPV propeller set. 

Two Glas Fiber Blend CCW Propeller by HQProp. Suitable for 120-160 air frames.

The Matek PDB-XPW is a power distribution board with punch and is designed for X frames. It will take input from 3S to 5S Lipo batteries which are ideal for Racing Drones. Power is provided to four ESCs and it is regulated and synchronized 5V DC and linear regulated 12V DC for all your gear such as Flight Controllers, cameras, video transmitters, RC receivers, LEDs, etc.

HQProp  Duct-89MMX8 for Cinewhoop Grey (2CW+2CCW)-Poly Carbonate

FETtec has released a 4-In-1 6S 45A DShot 2400 ESC to compliment the FETtec KISS FC and KISS FC.

Features an F7 processor, onboard spaces for both VTX and RX, Pit-mode built-in for Unify Nano, and solder-free connection to FETtec 4-in-1 ESC.