ESC
There are 29 products.
FETtec Spike-Absorber
Well-selected TVS diodes to absorb dangerous voltage spikes to protect connected components
Capacitor 35V 1000UF
Capacitor 35V 1000UF
Capacitor Panasonic FC series 35V 680UF
Capacitor Panasonic FC series 35V 680UF
Capacitor 50V 470UF
Capacitor 50V 470UF
SpeedyBee F405 V4 BLS 55A 30x30 FC&ESC Stack
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro. The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good performance. Always equipped with a Bluetooth controller allowing settings via the mobile application, the stack also has a TVS diode protecting the electronics. Integrated LEDs indicate the battery charge level and 2 3A BECs provide a 5V and 9V power supply.
Capacitor 35V 680UF
Capacitor 35V 680UF
FETtec 4in1 ESC 45A V1.2
FETtec has released a 4-In-1 6S 45A DShot 2400 ESC to compliment the FETtec KISS FC and KISS FC.
Capacitor Panasonic FC series 50V 1200UF
Capacitor Panasonic FC series 50V 1200UF
Capacitor Panasonic FC series 50V 120UF
Condensador Panasonic FC series 50V 120UF
Airbot cable 8 pins 3cm
The cable serves primarily to connect the FC and the 4in1 controllers.
Recommended accessories for Airbot products (and others with 8-pin connector)
Capacitor Panasonic FC series 50V 680UF
Capacitor Panasonic FC series 50V 680UF
Capacitor 50V 220UF
Capacitor 50V 220UF
Mamba Universal parts package
Set of components to mount any type of FC + ESC M2 or M3 stack in the absence of screws of the length you use.
FETtec JST-SH 8 Pin, Cable ESC - FC
Solderfree connection from FETtec FC to FETtec ESC
Airbot Furling32 4in1 mini ESC HC - F3 32bit BLHELI ESC 4x55A
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 60A burst and 55A continued.