Inicio
Hay 109 productos.
Filtros activos
Matek UBEC Duo, 4A/5-12V
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Matek ELRS 2.4G True Diversity RX
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
Matek Power Module 12S
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).
TBS Unify Pro32 Nano 5G8 V1.1
Con el TBS UNIFY PRO32 Nano, hemos aumentado la potencia de salida, mejorado la robustez, disminuido el consumo de energía, se ha añadido la capacidad para funcionalidades increibles y se ha perfeccionado la forma en que se monta en tu dron gracias a su reducido tamaño. En pocas palabras, es el mejor y mas completo nano VTx, preparado para el futuro, de mayor calidad y, en general, algo único jamás realizado antes.
Matek H7A3-Slim Flight Controller
Ethix Mini FPV Screen
Reloj FPV con 48 canales y escaneo de banda.
TBS Crossfire Immortal T V2 Antena
Hemos logrado mejorar la immortal T en durabilidad y sensibilidad de la señal.
TBS Unify PRO 5G8 HV (SMA)
Nuevo y acepta 6S, con salida de 5V para tu cámara FPV. Compatible con SmartAudio - Funcionalidades adicionales como el TBS CleanSwitch y el TBS PitMode. Conector Antena: SMA hembra pigtail
TBS Unify Pro 5G8 HV - Race (SMA)
Para carreras, cuando la salida de alta potencia del Unify PRO no es necesaria. Por lo tanto, hemos hecho una versión más barata sólo para los pilotos de carreras!
TBS Unify Pro 5G8 V3 (SMA)
Un transmisor de video solo para racers. 5 g de peso, 25 - 800 mW de potencia de salida (ajustable por el usuario). Bajar de peso peso y volar lejos nunca ha sido tan fácil y económico. Conector de antena: SMA
TBS Triumph-Stub SMA (RHCP 2PCS)
La revolución en la tecnología circular de 5,8 GHz. Sintonizado a mano para el mejor rechazo de ruido y reflejos. Verdadera circularidad y gran alcance. Diseñado por nada menos que IBCrazy. Versión SMA.