Inicio
Hay 248 productos.
Filtros activos
HQProp Gorro
Gorro para volar mejor en los fríos inviernos.
Matek UBEC Duo, 4A/5-12V
HQProp gorra
Gorra de HQProp.
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Gorro Black Sheep (Negro)
Gorro de TBS para mantener tu cabeza caliente durante las excursiones con viento.
Matek ELRS 2.4G True Diversity RX
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
Caddx Cap (Black)
Gorra con el logo de la marca CaddxFPV. En color negro
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
Matek Power Module 12S
Acollador TBS Tango
TBS Lanyard with buckle for quick detach.
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).
Matek H7A3-Slim Flight Controller
Servicio de Impermeabilización de tu Dron
Te impermeabilizamos tu dron, y lo testeamos en un entorno seguro. Si eliges este servicio no te preocupas de nada, nos encargamos de organizar la recogida del dron en tu casa, y te lo mandamos una vez este impermeabilizado ¡Sin gasto extra para ti!