TBS Triumph Pro (SMA Stub)
€17.27
.png)
Don't miss it
HQ Racing Prop R42 Light Grey - Poly Carbonate
€2.21
€2.77
-20%
Home
Active filters
Matek UBEC Duo, 4A/5-12V
€16.49
In stock
Matek Loud Buzzer 5V
€4.09
In stock
5V Buzzer for your flight controller
Matek Power Module 12S
€27.23
In stock
Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g
Matek Power Module 20S
€49.55
In stock
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek H7A3-Slim Flight Controller
€56.16
In stock
Radiomaster 2S 7.4V 6200mAh Lipo Battery
€30.57
In stock
Radiomaster RP1 V2
€15.66
In stock
The RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone.
Due to the low-latency and high-refresh-rate RF module, the RP1 and RP2 are ideal for FPV races or Long Range. Suitable for many models due to the ultra-light and Nano size, these receivers can fit just about anywhere!
Radiomaster RP3 V2
€17.31
In stock
The RP3 receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance and antenna switching for antenna diversity.
Radiomaster RP4TD ELRS 2.4GHz
€21.45
In stock
Featuring dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to its optimized circuit design. The reliable DCDC power supply circuit ensures lower operating temperatures during extended usage. Additionally, the dual TCXO contributes to the utmost frequency stability and makes the RP4TD a leader in its class. The RP4TD features built in WIFI so you can wirelessly upgrade firmware to configure the receiver via the built-in WebUI with your PC or mobile phone.
TBS SOURCE ONE V0.2 - Battery Pad
€3.48
€4.09
-15%
In stock
Spare top plate battery pad for the TBS SOURCE ONE V0.1 or later.
TBS Source One V3/HD Screw Set
€4.09
In stock
Screw Set for Source ONE V3/HD carbon frame.
TBS Source One V3 5 inch Spare Arm (2pcs)
€4.78
€7.36
-35%
In stock
SOURCE ONE replacement 5' arms.
TBS Source Two Screw Set
€3.26
In stock
Replacement set of screws for the TBS Source Two FPV racing frame
TBS Source Two V0.1 Spare Arm (2pcs)
€5.70
In stock
One pair of spare arms for the SOURCE TWO V0.1