Home
Active filters
Matek UBEC Duo, 4A/5-12V
TBS TANGO 2 v3
The perfect take-anywhere remote. Compact, robust and with TBS Crossfire built-in.
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
FlySky FS-i6S
The FlySky FS-i6S is a 10CH 2.4GHz Radio Controller
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
Matek Power Module 12S
Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).
Matek H7A3-Slim Flight Controller
FrSky 2.4GHz Taranis Q X7S ACCESS Transmitter (EU)
The X7S ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers.
Drone Waterproofing service
We waterproof your drone, and test it in a safe environment. If you choose this service, you don't have to worry about anything, we take care of organizing the pickup of the drone at your home, and we send it to you once it is waterproofed ¡Without extra charge!
FrSky Taranis X9D Plus SE 2019 with Latest ACCESS (EU) + Archer R8 PRO
The FrSky Taranis X9D Plus 2019 is a re-designed version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode, and features a program scroll wheel making it even easier to navigate the menus. Included Archer R8 PRO.
FrSky X-Lite BRACE LITE & Long+short Gimbals stick ends (White/Silver Color)
FrSky X-Lite BRACE LITE & Long+short Gimbals stick ends (White/Silver Color)
FrSky Taranis Q X7 (EU)
This is the latest powerful radio system from FrSky, the Taranis Q X7. This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings.
FrSky XM+ Ultra Mini Receiver
We can flash to the firmware version you want/need before shipping.
Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!