Home
Active filters
SpeedyBee Master 5 V2 Frame
Designed to handle both cinematic and freestyle flying, Master 5 V2 with great Deadcat geometry, places the flight controller closer to the center of gravity than other DC frames
The innovative anti-vibration stack structure dampens the effect from motor noise on the gyro, offering a stabilized running environment.Averaging 1.5 screws per arm, the quick release structure makes assembly and disassembly easily
Honeycomb-shaped aluminum alloy CNC drone head ensures better strength and look, with H-FOV 130° section, drone head gets larger field of view.Furthermore, the incorporated DJI O3 Air Unit also supports ND filters and changeable side plate mounting.
KitCopter Velcro Strap Kevlar V2 - 21x1.6 cm negro
KitCopter Velcro Strap Kevlar V2 - 21x1.6 cm negro
KitCopter Velcro Strap Kevlar V2 - 21x2 cm negro
KitCopter Velcro Strap Kevlar V2 - 21x2 cm negro
KitCopter Velcro Strap Kevlar V2 - 25x1.6 cm negro
KitCopter Velcro Strap Kevlar V2 - 25x1.6 cm negro
KitCopter Velcro Strap Kevlar V2 - 30x2 cm negro
KitCopter Velcro Strap Kevlar V2 - 30x2 cm negro
Velcro Strap KitCopter 22x2cm
Velcro Strap KitCopter 22x2cm
SpeedyBee Adapter 3
SpeedyBee 4pcs FPV Soldering Practice Board
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek Hall effect-Current sensor
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).