Home
Active filters
Mamba MSR SBUS/CPPM D16 16CH ACCST Receiver
BETAFPV 6 port 1S Charger Board V2
BETAFPV BEC Board for Naked Camera
You asked, we listen! To provide more choice for our customers, not only the BEC board for HERO6/7, BETAFPV also designed a new BEC board for GoPro HERO8. You don't need to worry your GoPro will turn off during a flight anymore. This BEC board only weighs about 1.5g, which makes your naked GoPro super neat and light. This BEC Board has integrated 5V@2A BEC, stock GoPro buttons, and LED pluggable connectors and remote recording!
BETAFPV Case V2 for Naked Camera
Case V2 for Naked Camera is upgraded with a new injection molding process and easier installation. Upgraded a better appearance design, it is more beautiful and clean. It is provided two different versions, more choice for different needed. If you already have has a GoPro HERO6/7, this is the best choice to make your naked camera to be super neat and light. Meanwhile, it can protect your camera motherboard well in a heavy crash. Expect that, we released a new ND16 filter for Naked Camera too. Meanwhile, BETAFPV released Beta95X HD Digital VTX, Beta95X V2 and Beta85X V2, supports for Naked Camera install, offering the best FPV film shootings needed.
BETAFPV ExpressLRS Recovery Dongle
ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS Nano Receiver, ELRS Micro Receiver, and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flash firmware by UART.
BETAFPV LiteRadio Transmitter Nano Gimbal
This is the original joystick gimbal for LiteRadio 3 and LiteRadio 2 SE. It functions well in its durability, bringing a good flight experience to pilots. Besides, the gimbal with wires makes it very easy to replace. For customers who want to replace or upgrade the gimbal for LiteRadio 3 or LiteRadio 2 SE, this gimbal has a good performance and reasonable price.
BETAFPV LiteRadio 2 SE Radio Transmitter Main Board
This is the main board of the LiteRadio 2 SE radio transmitter. It is compatible with the remote controller case of all LiteRadio 2 and LiteRadio 2 SE. For the owner of this radio transmitter, geting this main board is the most budget way to try the most popular ExpressLRS 2.4G radio link protocol.
BETAFPV Micro-Nano Module Adapter
With the use of micro-nano module adapter, nano tx module can work on transmitters with a Micro port (or JR port) easily. Especially, it supports BETAFPV ELRS Nano TX Module.
BETAFPV SMO 4K Camera
Meet the SMO 4K Camera - A high-degree ultralight action camera designed for your FPV Drones! Developed by BETAFPV using Insta360 technology, SMO 4K camera only weighs 30g and is perfectly fit for FPV drones. It allows pilots to fly faster, longer, and do more maneuvers, bringing pilots an extraordinary flying experience and a strong visual impact.
BETAFPV LiteRadio 2 SE Radio Transmitter V2 - FrSky
LiteRadio 2 SE Radio Transmitter is the upgraded version based on LiteRadio 2 and comes with huge improvements. Supports the Frsky / Futaba / Bayang, pilots can easily change Futaba, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter. Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.
BETAFPV Dipole T Antenna
The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status.
BETAFPV LiteRadio 3 Radio Transmitter
LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time, newly updated gimbal, and multi-protocol support (Frsky version). Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.
BETAFPV LiteRadio 3 Pro Radio Transmitter
LiteRadio 3 Pro Radio Transmitter—An open-source radio remote control that supports the EdgeTX system. It comes with the hall gimbals, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. The OLED display screen on the top of the transmitter brings visually instant data and a controlling interface to users. What's more, two optional internal RF systems and alternative external nano TX module make it a multi-protocol transmitter.
BETAFPV ELRS Micro TX Module 2.4G 1W
BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV ELRS Nano TX Module
BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.