Home
Active filters
Antivibration dampers for flight controller with M2 holes.
Antivibration dampers for flight controller with M2 holes.
Xhelix Bandeja magnética
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek Hall effect-Current sensor
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
ToolkitRC ADP 200 AC to DC Adapter
Input voltage:AC 100-240V 50/60Hz
Input current:MAX 2.5A
Output voltage:MAX 19.5V
Output current:MAX 10.3A
Connector:XT60
Size:165mm * 77mm * 32mm
Wight:518g
Work temp:-10 - 40'C
TrueRC Duality 2.4/5.8 Stubby for DJI
TrueRC never stop! The duality is a dual band CP omni covering both 2.4 and 5.8GHz bands in a single compact stubby package. Drop-in fit on the DJI FPV goggles V2*, letting you leaving them on at all times, thanks to a much lower profile than the stock linear antennas.
Foxeer ELRS Lite/ELRS 2,4 GHz ELRS V3.2.0
RushFPV Tank II Ultimate VTX
Foxeer Reaper Infinity 5W 40CH VTX
BetaFPV Aquila 16 FPV KIT
The Aquila16 FPV kit is a more advanced kit for beginners. It's an inverted quadcopter with a modular aerodynamic design. Fly for up to 8 mins, covering a maximum distance of 200 meters. Enjoy stable hovering and enhanced frame protection, allowing for consistent flight practice and better control. The kit includes the VR03 FPV Goggles for recording your flying and a Literadio 2 SE Radio Transmitter with the latest ELRS 3.0 firmware. All you need is in one pack! Accelerate your FPV learning curve and become a pro sooner with this kit.
Skyzone 04O Pro
The SKYZONE SKY04O PRO is an upgraded version of SKY04O, with a 1920*1080 OLED panel and new 42-degree optics, user can get a better and more immersive FPV experience than SKY04O, with a 1080P OLED panel, which is also a good choice for Walksnail avatar and hd zero HD VRX Module.
Skyzone M5 FPV monitor
The SKYZONE M5F 5.8 GHZ FPV monitor with DVR is a high brightness 5-inch monitor integrated with steadyview receiver, the receiver merges two signals into one, avoids image tearing and rolling, make image more stable and clear. The wheel with classic skyzone UI made the goggles easy to use, the monitor support 1cell 18650 battery, easy to switch battery, also support 2-6S Lipo, easy to power on the field.
Skyzone Cobra SD
The Skyzone Cobra SD goggles are the diversity version of the Cobra S Goggles and include a Diversity Receiver. The goggles are 16:9 FPV goggles and have an LCD screen with vivid color and high luminance, allowing pilots to see more details while racing. Pilots can wear glasses while using these goggles.
The new OS has two languages to select, and the menu system is easy to navigate. The shuttle wheel and new user interface allow the pilot to set all the settings just by rolling the wheel without taking off the goggles.