Home
Active filters
TRUERC Core 5.8
80mm Antenna, SMA connector, RHCP.
Mateksys Flight Controller F405-HDTE
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Flycolor Trinx G5 60A 4in1
Current: 60A*4
Burst: 70A*4
Voltage: 3-6S
ESC MCU: STM32G071
ESC firmware: Flycolor_Raptor_5
All D-shot, Pro-shot
Flycolor X Cross HV 3 Series 60A
Flycolor X Cross HV 3 Series60A
Voltage range: 5-12S
Continuous current: 60A
A Weight: 25.5g/132g
Dimensions: 55x28x10mm / 82x34x21.1mm
Applicable models: X-CLASS UAV / large narrow-arm multi-rotor UAV
Brotherhobby LA 2005-2450 KV
Matek GNSS M10-L4-3100
Matek F411-WTE
Matek F405-WMN
Matek FC H743-Wing V3
The Mateksys H743 series of flight controllers has all the power of the F7 processor, but the H7 now has more ports. This autopilot has up to 13 PWM servo outputs, 7 UART port, 2 i2c and CAN port.
Matek FC F405-Wing V2
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
Foxeer Reaper F4 128K 82A
BetaFPV 2204 Brushless Motor
BETAFPV 2204 brushless motor is enhenced version basic on the popular 2004 motor. It is smooth-running, powerful, and more controllable specifically designed for the 3” ducted whoop, 4” drone and 5” light blade and low general AUW for 5”. We highly recommend pilots using 2204 motors with 35A AIO Brushless FC, It will bring you a strong power to fly more flexible and durable.