TBS Crossfire Nano RX (SE)
€28.02
Mateksys Flight Controller F405-HDTE
€57.81
Tax included
Subscribe To When In Stock
You have successfully subscribed to this product
Buy secure. We use Paypal and other secure platforms.
Fast delivery. 24/48 hours Spain. 3-7 days international.
Return policy. Read our terms & conditions.
Calculate Shipping Cost
Description
Features
STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
InvenSense the 3rd generation IMU ICM42688-P
9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
8motors+3servos in INAV/BF multirotor mixer.
2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
USB pin breakout for connecting to external USB adapter.
Specifications
MCU: STM32F405RGT6
IMU: ICM42688-P
OSD: AT7456E, DJI OSD
Baro: SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
6x UARTs, 1x Softserial_Tx option
12x PWM outputs (8x Dshot)
1x I2C
4x ADCs (VBAT, Current, RSSI, Airspeed)
2x PINIUM
2x SH1.0_8pin connector for 4in1 ESC
1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red)
9~16V(Vxs) output ON/OFF switchable
Dual analog camera signal switchable
Power
Input: 9~60V (3~12S LiPo)
BEC: 5V 1.5A
BEC: Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
No Current Sensor built-in, supports external current sensor of PDB/4in1
