TBS Triumph Pro (SMA Stub)
€17.27
.png)
Don't miss it
HQ Racing Prop R42 Light Grey - Poly Carbonate
€2.21
€2.77
-20%
Home
Active filters
Matek UBEC Duo, 4A/5-12V
€16.49
In stock
Matek Loud Buzzer 5V
€4.09
In stock
5V Buzzer for your flight controller
Matek ELRS 2.4G True Diversity RX
€20.62
In stock
RGB LED Status
[Rainbow fade effect], Starting Up
[Green heartbeat], Web update mode enabled
[Slow blink 500ms on/off ], Waiting for connection from transmitter
[Red flashing 100ms on/off], Radio chip not detected
[Orange Double blink then pause], Binding mode enabled
[Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration
[Solid single color Connected to a transmitter], color indicates packet rate
Matek Optical Flow 3901-L0X
€24.75
In stock
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
Matek Power Module 12S
€27.23
In stock
Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g
Matek Power Module 20S
€49.55
In stock
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek 2812 Led Controller V2
€5.74
In stock
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).
Matek H7A3-Slim Flight Controller
€56.16
In stock
BetaFPV 2204 Brushless Motor
€28.02
In stock
BETAFPV 2204 brushless motor is enhenced version basic on the popular 2004 motor. It is smooth-running, powerful, and more controllable specifically designed for the 3” ducted whoop, 4” drone and 5” light blade and low general AUW for 5”. We highly recommend pilots using 2204 motors with 35A AIO Brushless FC, It will bring you a strong power to fly more flexible and durable.
F722 35A AIO Brushless Flight Controller
€86.74
In stock
F722 35A AIO Brushless Flight Controller is very reliable to meet your advanced FPV needs. Comes with an F722 chip this board provides a great performance capability and high processing speed, which brings pilots a stable and smooth flight. Featuring a 6-pin plug&play port, it can directly connect HD Digital VTX with NO soldering work. With the support of up to 6S input voltage, this FC pushes FPV racer to the max.
BetaFPV Aquila 16 FPV KIT
€239.58
In stock
The Aquila16 FPV kit is a more advanced kit for beginners. It's an inverted quadcopter with a modular aerodynamic design. Fly for up to 8 mins, covering a maximum distance of 200 meters. Enjoy stable hovering and enhanced frame protection, allowing for consistent flight practice and better control. The kit includes the VR03 FPV Goggles for recording your flying and a Literadio 2 SE Radio Transmitter with the latest ELRS 3.0 firmware. All you need is in one pack! Accelerate your FPV learning curve and become a pro sooner with this kit.
BETAFPV Cetus X FPV Kit
€264.38
In stock
Whether skillful pilots or new beginners, Cetus X FPV Kit, as the advanced 2S power whoop bundle, is a completely primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level.
BETAFPV A03 400mW 5.8G VTX
€24.79
In stock
A03 400mW 5.8G VTX, a video transmitter with OpenVTx firmware, supports both the SmartAudio and Tramp protocols. It features PIT/RCE/25mW/100mW/400mW adjustable output power for different use. With the 26*26mm mounting hole size, it is suitable for whoop or toothpick drones like X-Knight series, Beta85X/95X series, TWIG series and Pavo series.
BETAFPV VR03 FPV Goggles
€82.64
In stock
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.
Mateksys Flight Controller F405-HDTE
€57.81
In stock