Home
Active filters
Antivibration dampers for flight controller with M2 holes.
Antivibration dampers for flight controller with M2 holes.
FETtec Gravity 1 - (FG1) Accesories
Replacement parts for the frame Gravity 1.
BETAFPV Micro Canopy for HD Camera
This micro canopy is specially designed for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras, supporting an adjustable camera lens of 0-45°. It features high compatibility for both HD Digital VTX and Analog VTX like M03 Analog VTX.
BETAFPV Meteor85 Brushless Whoop Frame
This frame is customized for 85mm whoop drone and the frame for Meteor85, Meteor85 HD Digital VTX. With a marvelous design on the battery slot which keeps a low profile and triangle bilateral stretch structure of motor mounting position, this frame weighs only 11.32g.
iFlight Nazgul 5 V3 Frame kit
The Nazgul5 V3 is a 5" freestyle frame made from super stiff carbon for minimal resonance.
This frame is compatible with the DJI O3 HD system.
iFlight Nazgul XL10 V6
The main advantages of the XL series V6 are in the flight performance, and the stronger and thick arms. The XL series V6 frames fly balanced because of the true X configuration and wide stance. These main changings make flight stable in the air.
BETAFPV ExpressLRS Recovery Dongle
ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS Nano Receiver, ELRS Micro Receiver, and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flash firmware by UART.
BETAFPV LiteRadio Transmitter Nano Gimbal
This is the original joystick gimbal for LiteRadio 3 and LiteRadio 2 SE. It functions well in its durability, bringing a good flight experience to pilots. Besides, the gimbal with wires makes it very easy to replace. For customers who want to replace or upgrade the gimbal for LiteRadio 3 or LiteRadio 2 SE, this gimbal has a good performance and reasonable price.
Xhelix Bandeja magnética
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek Hall effect-Current sensor
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.