Home
Active filters
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Foxeer ELRS 915/868MHz Receiver
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
Radiomaster TX16S Mark II Radio Controller (Mode 2)
ToolkitRC ADP 200 AC to DC Adapter
Input voltage:AC 100-240V 50/60Hz
Input current:MAX 2.5A
Output voltage:MAX 19.5V
Output current:MAX 10.3A
Connector:XT60
Size:165mm * 77mm * 32mm
Wight:518g
Work temp:-10 - 40'C
Radiomaster Boxer Radio Controller (M2)
Radiomaster 2S 7.4V 6200mAh Lipo Battery
RadioMaster 5000mAh 2s Li-ion battery pack
The RadioMaster 5000mAh 2s Li-ion battery pack is the perfect battery for your Radiomaster TX16S. Offering longer run times and safer use when compared to Li-poly batteries.
ES900RX 868MHz - Module by Happymodel
This Long Range 868MHz wireless transmission module is designed based on Open source software ExpressLRS. It is compatible with most OpenTX radios, especially the TX16S from Radiomaster.
Happymodel Micro ES900TX and ES900RX module 868MHz
BETAFPV ELRS Lite RX/2.4GHz Flat antenna
TBS Tango 2 Replacement Oled
The Tango 2 replacement oled.
TBS Tango 2 Replacement Switch
Replacement switch for the page and exit buttons. Can be also used for switch E and F