Home
Active filters
ImmersionRC TrampHV
The most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20mm, the TrampHV is also the smallest direct LiPo-powered vTx in the business.
Supporting touch-free 'TNR' wands, for low inter-heat times, and full Tx configuration with a bright OLED display. (Accesory sold separately)
ImmersionRC Tramp Nano (International Version)
The original Tramp HV was released in 2016, and pushed the boundaries of what was possible with an Analog 5.8GHz FPV Transmitter.
The Tramp Nano is the smaller cousin, more suited to today’s lightweight models.
Control via Betaflight telemetry (Tramp Mode), button, or Touch’n’Race wand.
ImmersionRC RapidFIRE Goggle Module for FatShark googles
Best-in-class 5.8GHz diversity receiver for FatShark googles.
ImmersionRC RapidFIRE goggle Module Bay Doors
Included in the package are two painted, goggle Bay Doors, in RapidFIRE ventilated styling. One for the Dominator headsets, and one for compatible Attitude headsets.
ImmersionRC Tramp HV Accessory Pack, A/V Cables and TNR Tag
TNR Tag
TNR 4p to 4p
JST-GH to Power (Red JST) and camera 'Y' cable
JST-GH A/V Cable to bare ends
ImmersionRC Tramp HV Accessory Pack, RF Cables, U.FL to SMA
Tramp HV Accessory cables, Three different RF Cables to support most installations.
ImmersionRC TNR Wand, Personal Version
ImmersionRC's unique 'TNR Wand'. An invaluable tool for programming TrampHV Video Transmitters via touch-free NFC.
ImmersionRC SpiroNet 8dBi RHCP/LHCP Mini Patch
8dBi Right-Hand (RHCP) or Left-Hand (LHCP), select the option, Circular Polarized Patch antenna, Full-Custom design for the FPV market.
Ideal for head-mounting on a set of FatShark Goggles. Much wider beam than its 13dBi cousin, with easily double the range of a standard SpiroNET Omni.
ImmersionRC LZR-Mini Antenna Array
The spiroNET LZR-Mini Goggle Mounted Antenna is a unique modular antenna solution for FatShark Goggles. Hinged to ensure that the antennas are always pointing at a model when the pilots head is looking at the ground, and designed to fit in the stock Goggle case without removing antennas, nor cables.
ImmersionRC Tramp/Ghost Hybrid v2 UNO
Ghost Hybrid - Next Gen 2.4GHz Radio System, with Integrated Tramp Nano vTx
Uno version, Single receiver
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek Hall effect-Current sensor
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
ImmersionRC Tramp/Ghost Hybrid v2 DUO
Ghost Hybrid - Next Gen 2.4GHz Radio System, with Integrated Tramp Nano vTx
Dual Receiver version, the Hybrid Duo