Inicio
Hay 38 productos.
Filtros activos
Mateksys CRSF to PWM Converter,CRSF-PWM-6
Mateksys PDB-HEX 12S w/ Curr 264A,BEC 5A
Supports 6~60V DC input, 5A regulator with 5V/9V/12V outputs, high precision current sense up to 264A range.
Mateksys Micro BEC 6-60V to 5/9/12V
Mateksys Micro BEC 6-30V to 5V/9V, 3pcs/pkg
SpeedyBee F405 WING APP Fixed Wing Flight Controller
SpeedyBee F405 V4 BLS 55A 30x30 FC&ESC Stack
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro. The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good performance. Always equipped with a Bluetooth controller allowing settings via the mobile application, the stack also has a TVS diode protecting the electronics. Integrated LEDs indicate the battery charge level and 2 3A BECs provide a 5V and 9V power supply.
Mateksys Flight Controller F405-HDTE
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Matek GNSS M10-L4-3100
Matek F411-WTE
Matek F405-WMN
Matek FC H743-Wing V3
The Mateksys H743 series of flight controllers has all the power of the F7 processor, but the H7 now has more ports. This autopilot has up to 13 PWM servo outputs, 7 UART port, 2 i2c and CAN port.
Matek FC F405-Wing V2
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.