Home
Active filters
Mateksys Flight Controller F405-HDTE
Matek FC H743-Wing V3
The Mateksys H743 series of flight controllers has all the power of the F7 processor, but the H7 now has more ports. This autopilot has up to 13 PWM servo outputs, 7 UART port, 2 i2c and CAN port.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek Hall effect-Current sensor
Matek FC F405-Wing V2
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P Lipo Battery Pack with XT60 Plug
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P Lipo Battery Pack with XT60 Plug for professional FPV racing competitions.
Tattu R-Line 22.2V 4500mah 6S 95C FPV Lipo Battery with AS150 Plug
Tattu R-Line 4500mAh 95C 6S1P lipo battery pack is the best FPV lipo battery with high quality and reliable power. Suited for X8 FPV Cinelifter, eg: Siccario X8/Turtle X8/Taurus X8/Crocodile 7 PRO and Chimera7 6S long range, CMW Moneyshot and Moneyshot Mini.
Matek GNSS M10-L4-3100
Matek F411-WTE
Mateksys PDB-HEX 12S w/ Curr 264A,BEC 5A
Supports 6~60V DC input, 5A regulator with 5V/9V/12V outputs, high precision current sense up to 264A range.
ES900RX 868MHz - Module by Happymodel
This Long Range 868MHz wireless transmission module is designed based on Open source software ExpressLRS. It is compatible with most OpenTX radios, especially the TX16S from Radiomaster.
Mateksys Micro BEC 6-60V to 5/9/12V
Mateksys BEC12S-PRO, 9-55V to 5/8/12V-5A
About this product
The MATEKSYS 12S Pro BEC features a wide 9-55V Operating Input Range, 3x Output Voltage Options 5V/8V/12V and Supports continuous output current of up to 5A, peak current of 9A. This voltage regulator also features a synchronous switching step-down (buck) regulator, thermal Shutdown, output Short-circuit tolerance (2 seconds), overcurrent protection & self-recovery and much more!