Home
Active filters
Matek UBEC Duo, 4A/5-12V
Matek Loud Buzzer 5V
5V Buzzer for your flight controller
FlySky FS-i6S
The FlySky FS-i6S is a 10CH 2.4GHz Radio Controller
Matek Optical Flow 3901-L0X
Communication between 3901-L0X module and Flight controller via UART MSP V2 protocol supported by INAV and ArduPilot.
There is no detailed datasheet of MSP V2 protocol.
FlySky FS-i6X
6-channel FlySky station, upgradeable to 10. Best price / quality ratio to start in this hobby. Compatible with many receivers, choose yours in the selectable to get it at a better price than buying separately.
Matek Power Module 12S
Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g
Matek Power Module 20S
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Voltage Regulators
Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
Regulator 2 , 5.3V / 8.1V / 12.2V output options. supports typical continuous output current of up to 15A, Peak current of up to 22A.
1K:25K voltage divider built-in for 3.3V based voltage ADC
Size & Weight: 61x40x15mm, 63g
Matek 2812 Led Controller V2
If you are looking to add LED lighting to your racing drone the Matek 2812 lighting systems provides a neat plug and play solution. The setup consist of the Matek 2812 LED Controller (this product) and RGB LED Strips available separately – here. The controller boasts seven colour options and seven flashing modes. It has four output channels, so one for each arm on a quadcopter and supports control of up to 48 LEDs in total (12 per channel).
Matek H7A3-Slim Flight Controller
FlySky FS-X6B 2.4G 6CH i-BUS PPM PWM Receiver
FS-X6B is a 6 channel two-way receiver designed for multi-rotor aircraft. It uses the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol and dual omnidirectional antenna with superior noise reduction techniques. It's compact, easy to install and boasts a rich easy to use interface. FS-X6B support 6 channel PWM output, standard PPM output and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface.
FlySky IA6
FlySky FS-iA6 6ch Receiver - Dual Antennas
FlySky IA6B
This FlySky FS-iA6B 6ch Receiver works great with the FlySky FS-i6 Controller. This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be full range for all but the most demanding of applications. The receiver has end-on connectors to enable a neat installation in tight spaces. Built in connectors allow you to use any of the optional FlySky telemetry sensors. Dual antennas give the FS-iA6B excellent reception and interference rejection capability. With easy binding, compact dimensions, optional telemetry and dual antennas!
FlySky IA10B
This full 10 channel receiver works for most models and is considered a "full range" so it can handle larger models as well as the smaller ones. Built in connections allow you to use our optional telemetry sensors. Dual antennas give the FS-iA10 for unparalleled reception. Easy binding, light weight, optional telemetry, dual antennas.
FlySky FS-iA8X 2.4GHz AFHDS 2A iBUS PPM Micro Receiver
This is FlySky's smallest and lightest receiver.
FlySky FS-X14S 14-Channels 2.4GHZ DIVERSITY MICRO RECEIVER
FlySky FS-X14S 14 channel remote control receiver, compatible with FlySky FS-I6 NV14 FS-I6X FS-i4 FS-I4X Transmitter.