Home
Active filters
Skyzone Cobra SD
The Skyzone Cobra SD goggles are the diversity version of the Cobra S Goggles and include a Diversity Receiver. The goggles are 16:9 FPV goggles and have an LCD screen with vivid color and high luminance, allowing pilots to see more details while racing. Pilots can wear glasses while using these goggles.
The new OS has two languages to select, and the menu system is easy to navigate. The shuttle wheel and new user interface allow the pilot to set all the settings just by rolling the wheel without taking off the goggles.
Skyzone 04O Pro
The SKYZONE SKY04O PRO is an upgraded version of SKY04O, with a 1920*1080 OLED panel and new 42-degree optics, user can get a better and more immersive FPV experience than SKY04O, with a 1080P OLED panel, which is also a good choice for Walksnail avatar and hd zero HD VRX Module.
Skyzone M5 FPV monitor
The SKYZONE M5F 5.8 GHZ FPV monitor with DVR is a high brightness 5-inch monitor integrated with steadyview receiver, the receiver merges two signals into one, avoids image tearing and rolling, make image more stable and clear. The wheel with classic skyzone UI made the goggles easy to use, the monitor support 1cell 18650 battery, easy to switch battery, also support 2-6S Lipo, easy to power on the field.
Skyzone 04X Pro
The SKY04X PRO is the upgrade version of SKY04X, with new optics and a new OLED panel, the skyzone 04x pro can give pilot 52 degrees of field of view, giving huge immersive fpv experience, also with a new OLED panel, the 1920*1080 resolution, and a 100FPS frame rate, use can have way better experience when using the digital VRX system.
Mateksys Flight Controller F405-HDTE
Matek FC H743-Wing V3
The Mateksys H743 series of flight controllers has all the power of the F7 processor, but the H7 now has more ports. This autopilot has up to 13 PWM servo outputs, 7 UART port, 2 i2c and CAN port.
Matek DroneCAN-Digital power monitor
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path is 200 μΩ typical, providing low power loss in the application.
With this device, No calibration required, flight controller that support DroneCAN protocol can easily get accurate current & bus voltage readouts via CAN bus.
Matek DroneCAN Magnetometer RM3100
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware.
Matek Hall effect-Current sensor
Matek FC F405-Wing V2
Mateksys PDB FCHUB-12S V2
PDC
Input voltage range: 8~60V (3~12S LiPo)
4x70A continuous, 4x110A burst
4x ESC power /signal/ telemetry pads
Current Senor: 440A, 3.3V ADC, Scale 75
2x LED indicators for 5V, 12V
1K:20K voltage divider built-in
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P Lipo Battery Pack with XT60 Plug
Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P Lipo Battery Pack with XT60 Plug for professional FPV racing competitions.
Tattu R-Line 22.2V 4500mah 6S 95C FPV Lipo Battery with AS150 Plug
Tattu R-Line 4500mAh 95C 6S1P lipo battery pack is the best FPV lipo battery with high quality and reliable power. Suited for X8 FPV Cinelifter, eg: Siccario X8/Turtle X8/Taurus X8/Crocodile 7 PRO and Chimera7 6S long range, CMW Moneyshot and Moneyshot Mini.