List of products by brand BETAFPV
There are 74 products.
BetaFPV Aquila 16 FPV KIT
The Aquila16 FPV kit is a more advanced kit for beginners. It's an inverted quadcopter with a modular aerodynamic design. Fly for up to 8 mins, covering a maximum distance of 200 meters. Enjoy stable hovering and enhanced frame protection, allowing for consistent flight practice and better control. The kit includes the VR03 FPV Goggles for recording your flying and a Literadio 2 SE Radio Transmitter with the latest ELRS 3.0 firmware. All you need is in one pack! Accelerate your FPV learning curve and become a pro sooner with this kit.
BETAFPV 1103 BRUSHLESS MOTORS 11000KV (1PC)
BETAFPV Loop Antenna
Designed and manufactured by BETAFPV, the Loop Antenna is used for 2.4G/868MHz/915MHz TX modules or radios. It is an omnidirectional antenna that provides a 360-degree horizontal radiation pattern with a gain of 2.3dBi, covering a wider range. Besides, by soldering the coaxial cable to the antenna, it features less signal transmission loss for better performance.
BETAFPV SMO 4K Camera
Meet the SMO 4K Camera - A high-degree ultralight action camera designed for your FPV Drones! Developed by BETAFPV using Insta360 technology, SMO 4K camera only weighs 30g and is perfectly fit for FPV drones. It allows pilots to fly faster, longer, and do more maneuvers, bringing pilots an extraordinary flying experience and a strong visual impact.
BETAFPV Toothpick F722 2-6S AIO Brushless Flight Controller 35A (BLHeli_S) (ICM42688)
F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and BLHeli_S ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
BETAFPV F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (BMI270)
As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug&play ports for receiver and HD digital VTX, it is easy to install and requires less solder work. Besides, the board is a solid value for durable use thanks to the high-quality PCB material and enhanced production process.
BETAFPV F405 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (ICM42688)
Based on the F405 2-4S 20A Brushless Flight Controller V4, the F405 4S 20A Toothpick Brushless Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug&play ports for the receiver and HD Digitial VTX the same as the V4 board, the V5 board is made with a rational layout for easy solder and preventing solder from jumping to another pad and shorting components.
BETAFPV F4 1S 5A AIO Brushless Flight Controller
The ultralight F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. Compared to the previous version, the new board uses Serial ExpressLRS 2.4G instead of SPI ELRS 2.4G so that it can support ExpressLRS V3.0 and also has a Frsky RX version to choose from. We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
BETAFPV Lipo Battery Strap Kit (2-4S Battery)
Each strap is lightweight, strong and features Nylon backing for a no-slip surface on your battery. This helps prevent the battery from ejecting during aggressive flight or even crashes.
BETAFPV 300mAh 2S 45C Lipo Battery (2PCS)
300mAh 2S battery owns a more powerful performance with stronger mobility and higher sensitivity under high-speed flight. Moreover, it is suitable for Beta75X, Mobula 7 and Eachine Trashcan 2S brushless Whoop drone.
BETAFPV 2204 2400kv Brushless Motors (4 pcs)
BETAFPV 2204 brushless motor is enhenced version basic on the popular 2004 motor. It is smooth-running, powerful, and more controllable specifically designed for the 3” ducted whoop, 4” drone and 5” light blade and low general AUW for 5”. We highly recommend pilots using 2204 motors with 35A AIO Brushless FC, It will bring you a strong power to fly more flexible and durable.
BETAFPV 1404 4500KV Brushless Motors (4 pcs)
We are excited to introduce the 1404 4500KV brushless motor! It is designed for the Beta95X V3 Whoop Quadcopter and Beta95X V3 HD Digital VTX, which could offer pilots a more smooth and more powerful flight, and lead the Beta95X V3 series drones to the next level. In the meantime, this motor is also a great choice if you're building 2.5-4'' ultralight micro drones with Toothpick F405 AIO 20A FC V4.
BETAFPV 0802SE Brushless Motors 19500KV
0802SE 19500KV motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.88g/pc but also ensures excellent performance of power and thrust. It makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.
BETAFPV 1103 Brushless Motors 11000KV-2S (4 pcs)
Incredible power, smooth and quiet operation, and light enough for even the smallest builds. Get it while you can!
BETAFPV 1404 3800KV Brushless Motors (4 pcs)
1404 motor is a perfect candidate for a lightweight 3S and 4S setup. It can be built with a regular carbon fiber frame to run 3-inch props on. This motor is great if you're building 3-4'' toothpick-style ultralight micro drones with 20A Toothpick F4 AIO FC.